VJS144* “VAIO Touch Screen Driver Ver.1.2.3.4250” Update Program
Applicable models
VJS144*
※Applies only to models with touch panels
Applicable OS
Windows 11 Home 64bit
Windows 11 Pro 64bit
Windows 10 Pro 64bit
Issue to be resolved
- Even if the touch panel is set to disabled in “VAIO Control Center”, the touch panel may be enabled when an external display is connected or disconnected.
Download procedures
- Prepare a folder to store the downloaded file.
*In this explanation, we will use a folder named “Update” created on C Drive.
*Please use only single-byte alphanumeric characters for the folder’s name.
If you use double-byte characters, single-byte spaces, special characters, etc., the program cannot be executed correctly.
- Review the “Software License Agreement”.
- Click the [Agree and Download] button and download the update program to the folder created in Step 1.
- After downloading the program, apply the program by referring to the “How to apply the program and prior confirmation” below.
- For now, just download and do not run the file. After applying the update program, delete the “Update” folder created in Step 1.
How to apply the program and prior confirmation
Please note that failure to update the device according to the procedure may cause problems with the device.
■Prior confirmation
- Always restart your PC after applying this program.
■How to apply the program
- Close all applications running on Windows.
- Open the [PC (Computer)] – [Local Disk (C:)] – [Update] folder (the folder where you downloaded the file) and double-click the [SP000582.exe] file.
- The following dialog will appear, so confirm the content and click [OK].

- When the User Account Control screen appears, click [Yes]. It will begin applying the program.
- The following dialog appears, so click [OK].

- Restart the PC.
This completes all procedures.
How to confirm that the program has been applied
- Open [Device Manager].
- Double click [Human Interface Devices].
- Double click [VAIO Touch Screen Device].
- Properties will appear, so click the [Driver] tab.
- The update has been successfully completed if the version is “1.2.3.4250”.
