Search in:

VJS125, VJS145, “BIOS R0360ZA” Update Program

Applicable models

VJS125*, VJS145*

Applicable OS

Windows 11 Home 64bit 
Windows 11 Pro 64bit

Applicable BIOS version

If there is a character string other than “R0360ZA” in the BIOS version field

【How to check BIOS version】

  • With VAIO turned off, hold down the F3 or F4 key and press the power button. 
    The “VAIO Rescue Mode” screen will appear. 
  • Select [Launch BIOS Settings]. 
  • The BIOS setup menu will appear, so check “BIOS Version” in “System Information”. 

Function to be added

  • Added an entry for minimum character limit for BIOS password in the “Advanced” section. 

Issues to be resolved

Caution

Operation of all devices is not guaranteed. Please check the instructions and settings of your device before use. 

  • The screen disappears after entering the BitLocker PIN when certain USB mice are connected. 
  • Fixed the issue in which only the “ESC” key did not work as set when the Fn key lock setting in “VAIO Control Center” was enabled. 

Download procedures

  1. Prepare a folder to store the downloaded file. 

*In this explanation, we will use a folder named “Update” created on C Drive.
*Please use only single-byte alphanumeric characters for the folder’s name.
If you use double-byte characters, single-byte spaces, special characters, etc., the program cannot be executed correctly.

  1. Confirm the “Software License Agreement”.
  2. Click the [Agree and Download] button and download the update program to the folder created in Step 1.
  3. After downloading the program, apply the program by referring to the “How to apply the program and prior confirmation” below.
  4. For now, just download and do not run the file. After applying the update program, delete the “Update” folder created in Step 1.

How to apply the program and prior confirmation

■Prior confirmation

  • The first time you start the program after applying this program, it may take a few minutes to start. 
    At the first startup after the update, do not perform any operation until it starts. 
  • Once you apply this program, you will not be able to revert to the previous BIOS version. This is to avoid known security issues. Thank you for your understanding. 
  • There is no need to disable BitLocker drive encryption and device encryption, which are standard OS encryption functions, but if you are using another drive encryption solution, please temporarily disable it or check the guidelines for your encryption solution. 
  • Be sure to connect the AC adapter and power cord to the device. 
  • Disconnect all peripherals. 
  • Please sign into Windows as “Computer Administrator” or “Administrator” user. 
  • The username must be registered with single-byte alphanumeric characters. If you are using double-byte or single-byte space as the username, please create a new account with single-byte alphanumeric username. 
  • Quit all running applications. 
  • Stop resident software such as anti-virus software. 
  • Make sure that your PC is not set to go into standby, sleep, or hibernation mode while updating. 
  • Do not turn off the power while updating. 
  • If the “User Account Control” or “Open File – Security Warning” dialog appears, please check the contents, and continue the operation as indicated. 
  • Check the applicable model. If you apply this program to other models by mistake, updating will fail or malfunction will occur. 

■How to apply the program

  1. Close all applications running on Windows.
  2. Open the [PC (Computer)] – [Local Disk (C:)] – [Update] folder (the folder where you downloaded the file) and double-click the [SP000746.exe] file. 
  3. The following dialog will appear, so if there are no problems with the encryption settings, click [OK]. 
  1. When the User Account Control screen appears, click [Yes]. 
  2. When the following dialog appears, confirm that the model’s name is included within the applicable models for this update program, and then click [Update].